材質塑料管厚16（mm）產地浙江省海寧品牌金潮型號S32-3/4M等級優特殊功能耐腐蝕、耐高壓直徑32

性能和特點：propertyand feature

1、抗凍耐溫，工作溫度-30℃-150℃；
2、抗震性強，標準工作壓力在2.0mpa以上；
3、耐腐蝕，不結垢，衛生指標符合gb/t17219-1998標準；
4、重量輕，運輸方便；
5、安裝方便、快捷、安全、無需“攻絲”工序；
6、成本低于品質銅管件50%左右；
7、可直接用于工業與民用工程：純凈水、冷熱水、太陽能、空調、醫療、食品、化工等流體和氣體輸送管道系統的連接；
8、基材為聚酰增強樹脂，柔韌性、堅固性，使用壽命長。

(1)tolerance to freezing and high temperature: its operationaltemperature -30°c - 150°c;

(2)high tolerance to vibration, with standard operationalpressure more than 2.0 mpa;

(3)corrosion resistance without fouling, its sanitary standard of gb/t17219-1998;

(4)light and convenient for transportation;

(5)easy, rapid, convenient and safe for installation, withoutprocess of tapping;

(6)the cost is lower by about 50% compared with that of copperpipe fittings with same ;

(7)can be directly used in industrial or civil pipelineengineering projects, including transportation pipeline for li gas such as purified water, cool or hot water, solar energy,air conditioner, medical facility, food and chemical industry andso on;

(8)basic material is reinforced polyamide resin, that has thebest flexibility and solidity and long service life.

二、主要技術指標如下：principaltechnical indicators are shown as follows:

1、衛生指標應符合gb/t17219-1998生活飲用水輸送配設備及衛生防護材料安全性評價標準；
2、外觀：符合內外表面光滑、平整，無凹陷，裂縫和其他影響性能的表面缺陷，不含有可見雜質，同時應色澤均勻一致；
3、耐壓性能測試壓力：≤14mm為7.0mpa；＜16mm-18mm為5.0mpa；
≤18為25mm為4.0mpa；≥25mm5為2.4mpa；
測試時間為5min，無滲漏、破裂；
4、交變?cè)囼?yàn)：10次冷熱循環后，加壓2.4mpa；保持10min，無滲漏、破裂；
5、強度性能在-10℃下放置1h后加壓2.4mpa，保持10min；
在100℃下放置1h后加壓2.4mpa，保持10min；兩者應無滲漏、破裂。
6、產品在150℃下長時間做高溫檢測，加壓2.0mpa保持200h以上，管件應無滲漏、破裂；
7、常規條件下，做管環徑向拉伸試驗，產品拉伸強度為≥2000n；≤5300n。

(1)hygienicindicatormeets thestandards of gb/t17219-1998 for potable water transportation and ofsafety evaluation of health protection;

(2)appearance: inner and outer surface has lubricity,evenness without any depressed position, flaw, and other defect,which may influence property, without visual impurity. meanwhilethe color should be uniform;

(3)testing pressure: if d(diameter)≤14 mm it is 7.0mpa；if d＜16 mm-18 mm, it is 5.0mpa；if d≤18~25mm it is 4.0mpa；if d≥25mm, it is 2.4mpa. the test should lastfor 5 minutes, and no leakage or flaw is found during testing;

(4)test of alternate change: after 10 times of cool-hot cycles,pressure is increased to 2.4 mpa, and kept to 10 minutes, withoutany leakage or flaw.

(5)reliability: under -10°c, it is kept during 1 hour. thenpressure is increased to 2.4 mpa, and kept for 10 minutes. under100°c, it is kept during 1 hour. then pressure is increased to 2.4mpa, and kept for 10 minutes. in both cases, no leakage or flaw isfound.

(6)reliability: under 150°c and pressure 2.0mpa, it is keptduring more than 200 hours. no leakage or flaw is found.

(7)straining strength: under normal circumstance, the productstraining strength of radiation direction should be≥2000n；≤5300n.

規格裝箱數規格裝箱數s s 18400s40s 20300s50s 25210規格裝箱數規格裝箱數s18-16450s40-16s20-16350s40-20s20-18350s40-25s25-16280s40-32s25-18280s50-16s25-20240s50-20s32-16s50-25s32-18s50-32s32-20s50-40s32-25規格裝箱數規格裝箱數s16-1/2f650s32-1/2fbitmaps16-3/4f600s32-3/4fs18-1/2f600s32-1fs18-3/4f600s32-3/2fs20-1/2f500s40-3/4fs20-3/4f450s40-1fs25-1/2f400s40-3/2fs25-3/4f320s50-1fs25-1fs50-5/4f規格裝箱數規格裝箱數s16-1/2m700s32-1ms16-3/4m600s32-5/4ms18-1/2m600s40-1/2ms18-3/4m600s40-3/4ms20-1/2m500s40-1ms20-3/4m450s40-3/2ms25-1/2m350s40-2ms25-3/4m360s50-3/4ms25-1m360s50-1ms25-1-1/4ms50-3/2ms32-1/2ms50-2ms32-3/4m